15 Unquestionable Reasons To Love Replacement Door Handles

How to Replace Door Handles

The door handles of your home are an important part of the design. A new handle will bring your home's decor and interior modern.

Over  door handle repairs near me , your door knobs may become stiff or even break. These are indications that it's time to replace the knobs. This guide will help you select the best door handle replacement for your home.

Door Knobs

The handles on your doors will improve the appearance of your house and allow you to open and close them. They are available in a wide variety of finishes, colors and styles to complement your decor. If yours has begun to show signs or need an upgrade, you can replace them in a few easy steps.

You must locate the shaft, or spindle through which the knob is connected to the door. Some knobs have a small opening that you can access with a screwdriver for removal of the set screws that secure the handle. Some have a thin slot, or hole, that allows you to press the spring-activated detent pin using flathead. This pin lets go of the latch mechanism and lets you pull or push the knob.

Once you have access to the shaft or spindle remove the old door knob and replace it with the new one. Be sure to align it correctly and test to see that the latch is working properly before tightening your new set screws.

After replacing the knob, you can place the latch rod over the hole on the door. Lock it in place using the rod system on the second knob. Ensure that the holes are in alignment, then tighten the latch plate screws.

Some prefer a smooth or brushed metal finish on their door hardware to create a sleek, contemporary look that complements other furniture in their homes. Others prefer a more rustic design which is great for farmhouse-styled spaces. If you have family members who are unable to move You may think about an rim lock or a lever style door knob that require less pressure to operate.

Other factors are being considered more and more for the design of door handles. Accessibility and infection control have been major considerations when it comes to developing new designs for handles. For example some handles can be operated using the arm of a person.

Latch

The latch that holds the door handle open may wear out as time passes. Switching out the old latch to make room for the new handle is an easy DIY project and will make a significant difference in how your door opens and closes.

Depending on the kind of handle you choose, the latch could be a separate part or a component of the knob. In either case, you will follow the same process for removing and replacing. Getting the old latch out of the way is relatively simple, especially if your door handle is equipped with what's known as a "magic button". The button is located on the left side of the knob, this little pressure-slot is what you have to press to pull the latch right out of the handle and off of the latching mechanism.

If your handle isn't equipped with this magical button, the first step is to take off any cover plates that sit over the latch plate. They are typically circular or rectangular and can be removed by using a screwdriver in order to remove them off of the handle. Some have a slot in which you can put your screwdriver, while others just snap off.

Then, unscrew the machine screws that hold the inner plate and latch to the door handle. These are the screws with a sharp point - you will be required to keep them in a secure location to use them again in the next steps. After the screws have been removed, you can remove the latch plate as well as the mechanism from the hole and set it aside.

Then you can begin to install the new latch. Insert the inside plate of the latch into the hole in the door, and secure it using the hardware provided. Make sure that the square pin in the interior of the latch is facing the latching mechanism in the handle and aligns with the other screw holes in the handle. Then fix the exterior latch plate using the screws supplied.

Strike Plate

It is not uncommon to replace a door handle because it feels loose, or does not lock properly. This is usually due to incorrectly aligned parts in the latching mechanism, such as a strike plate that's too small or shifted up or down on the doorjamb over time. This project allows you to replace your old strikeplate with a more substantial one, which will provide more security for your door and ensure it stays shut.

To check if the problem is due to the strike plate, apply lipstick or similar marking material to the latch bolt. Close the door, then try to latch it. If the mark is lower than your strike plate hole, it indicates that the plate is too small and the door will not latch. If the mark is above the strike plate hole, it's likely that the strike plate has been moved up or down the doorjamb.

You might be able to put the new strikeplate in place over the old one using the screws included with it, based on the door you have. It is possible that you will need to drill holes first and then chisel a bit of wood to ensure a perfect fit. If this is the case, be careful to not chisel out too much wood or you'll damage the strength of the doorjamb.

Installing a new style box strike plate will give the lock a more secure hold on the doors and will require more force to open them. Typically, it requires two longer screws to secure the strike plate to the frame of the door. You'll have remove the old strike plate and then drill and chisel the wood to create space for the new one.

This strike plate is made to work with antique rim locks, and it's made from sturdy solid brass in the heavy duty thickness. It comes with wood screws and machine screws, ensuring that you have the right hardware for your job. Be aware that wood screws have a pointed tip, while machine screws are more blunt.